[Commits] 769b050: MDEV-7668: Intermediate master groups CREATE TEMPORARY with INSERT, causing parallel replication failure

Kristian Nielsen knielsen at knielsen-hq.org
Mon Mar 9 14:15:54 EET 2015


revision-id: 769b050c2b6bc10182ddea14436629adb7d69fa6
parent(s): e13459a11eb5938b54b88c7a1529491df6dd3b49
committer: Kristian Nielsen
branch nick: server
timestamp: 2015-03-09 13:06:32 +0100
message:

MDEV-7668: Intermediate master groups CREATE TEMPORARY with INSERT, causing parallel replication failure

Parallel replication depends on locking (table locks, row locks, etc.) to
prevent two conflicting transactions from running and committing in parallel.
But temporary tables are designed to be visible only to one thread, and have
no such locking.

In the concrete issue, an intermediate master could commit a CREATE TEMPORARY
TABLE in the same group commit as in INSERT into that table. Thus, a
lower-level master could attempt to run them in parallel and get an error.

More generally, we need protection from parallel replication trying to run
transactions in parallel that access a common temporary table.

This patch simply causes use of a temporary table from parallel replication
to wait for all previous transactions to commit, serialising the replication
at that point.

(A more fine-grained locking could be added later, possibly. However,
using temporary tables in statement-based replication is in any case
normally undesirable; for example a restart of the server will lose
temporary tables and can break replication).

Note that row-based replication is not affected, as it does not do any
temporary tables on the slave-side.

This patch also cleans up the locking around protecting the list of
temporary tables in Relay_log_info. This used to take the
rli->data_lock at the end of every statement, which is very bad for
concurrency. With this patch, the lock is not taken unless temporary
tables (with statement-based binlogging) are in use on the slave.

---
 .../suite/rpl/r/rpl_parallel_multilevel2.result    |   52 +++++++++++++
 .../suite/rpl/t/rpl_parallel_multilevel2.cnf       |   17 +++++
 .../suite/rpl/t/rpl_parallel_multilevel2.test      |   80 ++++++++++++++++++++
 sql/sql_base.cc                                    |   56 ++++++++++----
 4 files changed, 192 insertions(+), 13 deletions(-)

diff --git a/mysql-test/suite/rpl/r/rpl_parallel_multilevel2.result b/mysql-test/suite/rpl/r/rpl_parallel_multilevel2.result
new file mode 100644
index 0000000..47bf2ff
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_parallel_multilevel2.result
@@ -0,0 +1,52 @@
+include/rpl_init.inc [topology=1->2->3]
+*** MDEV-7668: Intermediate master groups CREATE with INSERT, causing parallel replication failure ***
+SET @old_updates= @@GLOBAL.binlog_direct_non_transactional_updates;
+SET GLOBAL binlog_direct_non_transactional_updates=OFF;
+SET SESSION binlog_direct_non_transactional_updates=OFF;
+ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
+CREATE TABLE t1 (a int PRIMARY KEY, b INT) ENGINE=InnoDB;
+include/stop_slave.inc
+SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
+SET GLOBAL slave_parallel_threads=10;
+SET @old_commit_count=@@GLOBAL.binlog_commit_wait_count;
+SET GLOBAL binlog_commit_wait_count=2;
+SET @old_commit_usec=@@GLOBAL.binlog_commit_wait_usec;
+SET GLOBAL binlog_commit_wait_usec=2000000;
+SET @old_updates= @@GLOBAL.binlog_direct_non_transactional_updates;
+SET GLOBAL binlog_direct_non_transactional_updates=OFF;
+SET SESSION binlog_direct_non_transactional_updates=OFF;
+CHANGE MASTER TO master_use_gtid=current_pos;
+SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
+include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=10;
+CHANGE MASTER TO master_use_gtid=current_pos;
+BEGIN;
+CREATE TEMPORARY TABLE t2 (a INT PRIMARY KEY) ENGINE=MEMORY;
+COMMIT;
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT a, a*10 FROM t2;
+DROP TABLE t2;
+include/save_master_gtid.inc
+include/start_slave.inc
+include/sync_with_master_gtid.inc
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	10
+include/start_slave.inc
+include/sync_with_master_gtid.inc
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	10
+include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=@old_parallel_threads;
+SET GLOBAL binlog_commit_wait_count=@old_commit_count;
+SET GLOBAL binlog_commit_wait_usec=@old_commit_usec;
+SET GLOBAL binlog_direct_non_transactional_updates= @old_updates;
+include/start_slave.inc
+include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=@old_parallel_threads;
+include/start_slave.inc
+SET GLOBAL binlog_direct_non_transactional_updates= @old_updates;
+CALL mtr.add_suppression("Statement accesses nontransactional table as well as transactional or temporary table");
+DROP TABLE t1;
+include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.cnf b/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.cnf
new file mode 100644
index 0000000..4e1d387
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.cnf
@@ -0,0 +1,17 @@
+!include ../my.cnf
+
+[mysqld.1]
+log-slave-updates
+loose-innodb
+
+[mysqld.2]
+log-slave-updates
+loose-innodb
+
+[mysqld.3]
+log-slave-updates
+loose-innodb
+
+[ENV]
+SERVER_MYPORT_3=		@mysqld.3.port
+SERVER_MYSOCK_3=		@mysqld.3.socket
diff --git a/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.test b/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.test
new file mode 100644
index 0000000..4125394
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_parallel_multilevel2.test
@@ -0,0 +1,80 @@
+--source include/have_innodb.inc
+--let $rpl_topology=1->2->3
+--source include/rpl_init.inc
+
+--echo *** MDEV-7668: Intermediate master groups CREATE with INSERT, causing parallel replication failure ***
+
+--connection server_1
+SET @old_updates= @@GLOBAL.binlog_direct_non_transactional_updates;
+SET GLOBAL binlog_direct_non_transactional_updates=OFF;
+SET SESSION binlog_direct_non_transactional_updates=OFF;
+ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
+CREATE TABLE t1 (a int PRIMARY KEY, b INT) ENGINE=InnoDB;
+--save_master_pos
+
+--connection server_2
+--sync_with_master
+--save_master_pos
+--source include/stop_slave.inc
+SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
+SET GLOBAL slave_parallel_threads=10;
+SET @old_commit_count=@@GLOBAL.binlog_commit_wait_count;
+SET GLOBAL binlog_commit_wait_count=2;
+SET @old_commit_usec=@@GLOBAL.binlog_commit_wait_usec;
+SET GLOBAL binlog_commit_wait_usec=2000000;
+SET @old_updates= @@GLOBAL.binlog_direct_non_transactional_updates;
+SET GLOBAL binlog_direct_non_transactional_updates=OFF;
+SET SESSION binlog_direct_non_transactional_updates=OFF;
+CHANGE MASTER TO master_use_gtid=current_pos;
+
+--connection server_3
+--sync_with_master
+--save_master_pos
+SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
+--source include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=10;
+CHANGE MASTER TO master_use_gtid=current_pos;
+
+
+--connection server_1
+
+BEGIN;
+CREATE TEMPORARY TABLE t2 (a INT PRIMARY KEY) ENGINE=MEMORY;
+COMMIT;
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT a, a*10 FROM t2;
+DROP TABLE t2;
+--source include/save_master_gtid.inc
+
+--connection server_2
+--source include/start_slave.inc
+--source include/sync_with_master_gtid.inc
+SELECT * FROM t1 ORDER BY a;
+
+--connection server_3
+--source include/start_slave.inc
+--source include/sync_with_master_gtid.inc
+SELECT * FROM t1 ORDER BY a;
+
+
+# Clean up
+
+--connection server_2
+--source include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=@old_parallel_threads;
+SET GLOBAL binlog_commit_wait_count=@old_commit_count;
+SET GLOBAL binlog_commit_wait_usec=@old_commit_usec;
+SET GLOBAL binlog_direct_non_transactional_updates= @old_updates;
+--source include/start_slave.inc
+
+--connection server_3
+--source include/stop_slave.inc
+SET GLOBAL slave_parallel_threads=@old_parallel_threads;
+--source include/start_slave.inc
+
+--connection server_1
+SET GLOBAL binlog_direct_non_transactional_updates= @old_updates;
+CALL mtr.add_suppression("Statement accesses nontransactional table as well as transactional or temporary table");
+DROP TABLE t1;
+
+--source include/rpl_end.inc
diff --git a/sql/sql_base.cc b/sql/sql_base.cc
index d4fb2a8..9aa9d1e 100644
--- a/sql/sql_base.cc
+++ b/sql/sql_base.cc
@@ -661,20 +661,23 @@ static void mark_temp_tables_as_free_for_reuse(THD *thd)
     DBUG_VOID_RETURN;
   }
   
-  thd->lock_temporary_tables();
-  for (TABLE *table= thd->temporary_tables ; table ; table= table->next)
+  if (thd->temporary_tables)
   {
-    if ((table->query_id == thd->query_id) && ! table->open_by_handler)
-      mark_tmp_table_for_reuse(table);
-  }
-  thd->unlock_temporary_tables();
-  if (thd->rgi_slave)
-  {
-    /*
-      Temporary tables are shared with other by sql execution threads.
-      As a safety messure, clear the pointer to the common area.
-    */
-    thd->temporary_tables= 0;
+    thd->lock_temporary_tables();
+    for (TABLE *table= thd->temporary_tables ; table ; table= table->next)
+    {
+      if ((table->query_id == thd->query_id) && ! table->open_by_handler)
+        mark_tmp_table_for_reuse(table);
+    }
+    thd->unlock_temporary_tables();
+    if (thd->rgi_slave)
+    {
+      /*
+        Temporary tables are shared with other by sql execution threads.
+        As a safety messure, clear the pointer to the common area.
+      */
+      thd->temporary_tables= 0;
+    }
   }
   DBUG_VOID_RETURN;
 }
@@ -5586,6 +5589,14 @@ TABLE *open_table_uncached(THD *thd, handlerton *hton,
               (uint) thd->variables.server_id,
               (ulong) thd->variables.pseudo_thread_id));
 
+  if (add_to_temporary_tables_list)
+  {
+    /* Temporary tables are not safe for parallel replication. */
+    if (thd->rgi_slave && thd->rgi_slave->is_parallel_exec &&
+        thd->wait_for_prior_commit())
+      return NULL;
+  }
+
   /* Create the cache_key for temporary tables */
   key_length= create_tmp_table_def_key(thd, cache_key, db, table_name);
 
@@ -5822,6 +5833,25 @@ bool open_temporary_table(THD *thd, TABLE_LIST *tl)
     DBUG_RETURN(FALSE);
   }
 
+  /*
+    Temporary tables are not safe for parallel replication. They were
+    designed to be visible to one thread only, so have no table locking.
+    Thus there is no protection against two conflicting transactions
+    committing in parallel and things like that.
+
+    So for now, anything that uses temporary tables will be serialised
+    with anything before it, when using parallel replication.
+
+    ToDo: We might be able to introduce a reference count or something
+    on temp tables, and have slave worker threads wait for it to reach
+    zero before being allowed to use the temp table. Might not be worth
+    it though, as statement-based replication using temporary tables is
+    in any case rather fragile.
+  */
+  if (thd->rgi_slave && thd->rgi_slave->is_parallel_exec &&
+      thd->wait_for_prior_commit())
+    DBUG_RETURN(true);
+
 #ifdef WITH_PARTITION_STORAGE_ENGINE
   if (tl->partition_names)
   {


More information about the commits mailing list